SeaLevel ULTRA 530.LPCI User Manual

ACB-MP+4.PCI User Manual Part Number 5402 www.sealevel.com PO Box 830 – Liberty, SC 29657 864.843.4343

RS-485 or RS-485T Base+5, M3-M0=4, 0100 (With termination) Base+5, M3-M0=5, 0101 (Without termination) Pin # Signal Name Mode 2 TDA TX– Transmit

RS-530A Base+5, M3-M0=F, 1111 Pin # Signal Name Mode 2 TDA TX– Transmit Negative Output 3 RDA RX– Receive Negative Input 4 RTSA RTS– Reque

Electrical Characteristics Features  Configurable for RS-232, RS-422, RS-485, RS-530, RS-530A, or V.35  Z85230 Enhanced Serial Communications Con

Appendix A – Troubleshooting Following these simple steps can eliminate most common problems. 1. Read this manual thoroughly before attempting to

Appendix B - How To Get Assistance Begin by reading through the Trouble Shooting Guide in Appendix A. If assistance is still needed please see below.

Appendix C – Electrical Interface RS-232 Quite possibly the most widely used communication standard is RS-232. This implementation has been defined a

RS-485 RS-485 is backwardly compatible with RS-422; however, it is optimized for partyline or multi-drop applications. The output of the RS-422/485 d

Appendix D – Silk Screen – 5402 PCB © Sealevel Systems, Inc. - 15 - ACB-MP+4.PCI User Manual

Appendix E - Compliance Notices Federal Communications Commission Statement FCC - This equipment has been tested and found to comply with the limits

Warranty Sealevel's commitment to providing the best I/O solutions is reflected in the Lifetime Warranty that is standard on all Sealevel manufa

Table of Contents INTRODUCTION...

Introduction The ACB-MP+4.PCI (Item# 5402) is a four-port PCI bus RS-232, RS-422, RS-485 synchronous serial interface. Designed using the popular Zi

Before You Get Started What’s Included The ACB-MP+4.PCI is shipped with the following items. If any of these items is missing or damaged please conta

Installation & Configuration Software Installation Windows 2000/XP/Vista™ Operating Systems Do not install the adapter until the software has b

Physical Installation The adapter is universal bus compatible and can be installed in any 3.3V or 5V PCI expansion slot. Do not install the adapte

Technical Description The ACB-MP+4.PCI utilizes the Zilog 85230 Enhanced Serial Communications Controller (ESCC) and includes a dedicated Z85230 per

100-Pin Connector Pin Out The ACB-MP+4.PCI has a 100-pin high-density connector and includes a cable (Item# CA339) that breaks out to four (4) DB25 m

Interface Selection The ACB-MP+4.PCI supports a variety of electrical interfaces. Refer to the Control and Status Register Definitions found in the T